marqueeImage

Ontario Museum Notes

Note #6:
Handling Museum Objects


A major concern of all museum staff is protecting the collection from the detrimental effects of the museum environment. Much attention has focused on controlling temperature, relative humidity and light levels. However, equally important is the need to ensure that artifacts are given adequate physical protection through safe handling procedures.

Proper handling is essential for preservation of museum artifacts. It reduces the likelihood of physical damage to the artifact being moved. A torn textile, a broken pot, a stained plaster plaque -- all are permanently damaged. The loss is in both monetary and museological value, and is unnecessary. Establishing and implementing handling procedures in a museum promotes professionalism in the staff. The benefits include greater safety for the collection, staff pride, and an enhanced reputation for the museum.

Every museum should have a set of handling procedures which is taught to all staff members as soon as they begin work at the museum. An orientation and training program will alert paid staff, volunteers and board members to the dangers of thoughtless handling. Supervision will be required until new staff are experienced enough to manage safely on their own.

People in positions of authority should serve as role models in helping to reinforce the established procedures. Care should be taken that people do not grow careless; refresher courses or periodic evaluations are usually necessary.

Museum artifacts require a special kind of care and respect. The following list serves as a guide to assist with safe handling practices, but in the long run, each artifact presents an individual problem. Before handling a museum artifact, you must evaluate its special needs. By combining common sense and the following rules, you may determine the best solution to each problem.

Tragic consequences can be avoided by careful thought and preparation and a positive attitude towards artifact care.

General Rules

  • Handle museum artifacts as little as possible.
  • Handling should be done only by properly trained staff.
  • Do not hurry.
  • Handle each object as if it were the most precious.
  • Cleanliness is essential.
  • No smoking, drinking or eating around objects.
  • No pens or sharp objects around objects.
  • If a mishap occurs record the damage in a condition report. Keep and label detached parts.

Before you pick up an object...

  • Determine whether your hands are properly protected. Are they clean? Should you be wearing gloves?
    • Cotton gloves should always be used when handling metal, paper, textiles, unglazed pottery, marble and other porous materials.
    • Cotton gloves should not be worn while handling glass and glazed ceramics. To prevent slippage, hands should be clean and dry or latex/vinyl gloves should be worn.

  • Examine the object carefully and learn its strengths and weaknesses. Be wary - there may be internal weakness or old (and weak) repairs that are not obvious to the naked eye.

  • Are you wearing a belt buckle, likely to scratch the artifact? Should you remove your jewellery?

  • If it is too heavy to handle on your own - Get help! Discuss each person's role before moving the artifact.

When you pick an object up...

  • Use both hands.
  • Never pick it up by the handle, rim or a projecting part.
  • Pick it up by its most solid component.
  • Handle only one object at a time.

When you move an object...

  • Plan your route (be sure all doors will be open) and prepare a place ahead of time to receive the artifact.
  • Support all objects while in transit by making use of a carrying tray (for small objects), rigid supports (for paper or flat textiles), or a trolley (for heavy or large objects).
  • Never carry dissimilar materials together (eg. metal and paper).
  • Place an object on its most stable surface.
  • Provide adequate padding to minimize vibration and abrasion.
  • Never drag an object. Never walk backwards.
  • Nothing should protrude beyond the edges of the container or cart.

Small delicate objects

  • Carry in a padded carrying tray.
  • To avoid abrasion make use of tissue paper and/or polyethylene padding materials (eg. Microfoam).

Flat flexible objects (eg. paper documents, textiles, beaded items)

  • Always support these types of artifacts from below with a rigid support. Materials for rigid supports might include a piece of fabric-covered plywood, matboard, fluted polyethylene or polypropylene board (eg. Cor-X, Coroplast). Choice will depend on the weight of the object.

  • The rigid support should be slightly larger then the artifact. For light artifacts (eg. a document) place a piece of matboard on top, to prevent air currents from lifting the artifact off the support while being moved.

Large flat textiles (eg. quilts and carpets)

  • Avoid folding. Roll around a large diameter tube (minimum 4") which has been covered with polyethylene sheeting and acid-free tissue. Once the artifact is rolled, secure it by tying with cloth tape.

Books

  • Books with damaged spines should be tied with a wide piece of cloth tape (eg. twill tape) before moving.
  • Do not force book spines open while reading or photocopying.
  • Do not fold over corners of pages.
  • Do not lick fingers while turning pages.

Furniture

  • Always lift furniture -- never drag it. Make use of a dolly if it is too heavy to move on your own.
  • Lift by the solid parts of the framework (eg. chairs by the seat, tables by the
  • legs).
  • Remove drawers and tie doors shut before moving.
  • Keep furniture upright.

Framed items

  • Always carry upright -- unless the painted surface is fragile -- then keep horizontal at all times.
  • Be wary of projecting decorative elements.
  • Carry with the glass side towards you -- one hand at the bottom, the other at one side.
  • Place artifact on a well-padded surface -- carpeting is useful for this purpose.
  • If vertical stacking is necessary, place oversized pieces of cardboard between each frame. Never touch or lean anything directly on the front or back of a painting.

List of Suppliers

Acid-Free Paper Products

Carr McLean Co.
461 Horner Avenue
Toronto, Ontario
M8W 4X2

Woolfitts Art Supplies
390 Dupont Street
Toronto, Ontario
M5R 1V9
(416) 922-0933

Cotton Gloves

Woolfitts Art Supplies
390 Dupont Street
Toronto, Ontario
M5R 1V9
(416) 922-0933

Latex Gloves

Medical or chemical suppliers

Polyethylene Foam
Poly Fab
62 Bartor Road
Weston, Ontario
M9M 2G5
(416) 740-4085

Polyethylene Sheeting

Hardware stores

Polyethylene/Polypropylene Board (eg. Cor-X or Coroplast)

E.M Plastics & Electric
430 Norfinch Drive
Downsview, Ontario
M3N 1Y4

Some hardware stores

Twill Tape (undyed cotton or polyester)

Fabric stores

Bibliography

Lister, Joyce M. "Safeguarding Museum Collections : A Review of Handling." Museum Quarterly, 13:2 (July, 1984); pp. 23-26.

Rowlison Eric B. "Rules for Handling Works of Art." Museum News, April 1975.

Graham-Bell, M. Preventive Conservation - A Manual. Victoria, B.C.: British Columbia Museums Association, 1986.